ATmega8 mini module - microBOARD-M8

Module microBOARD-M8-miniature set of run with the host microcontroller ATmega8a on Board. On Board there is also a voltage regulator 5V, quartz resonator 12 MHz and socket programming IDC-10 (kanda). The module can be programmed in the language C and BASCOM AVR.

In our offer alsoprogramming AVRandtile connector(seen in photo).

• 8 KB Flash memory (program memory)
• 512 bytes EEPROM
• 1 KB of SRAM (Static RAM)
• 2 counters / timers 8-bit
• 1 counter / timers 16-bit
• 1 analog-to-digital Converter (8 channels 10-bit accuracy)
• Network interfaces: SPI, UART, TWI (I2C)
• Built-in analog comparator
• 3-channel PWM

• MCU: ATmega8A-AU
• Connector for ISP programming
• Voltage regulator 5 V (78M05)
  • Maximum current: 0.5 A
• The supply voltage of the microcontroller is filtered using capacitors
• Supply voltage analog part, optionally filtered using the balls ferrytowego
• Power supply by continuous voltage in the range 7 - 12 V
• The led, indicating the connection of the supply voltage
• The pins of the microcontroller are on 2 connection pins (goldpin) – with the exception of the conclusions is connected to the quartz resonator
• Resistor podciągający RESET supply voltage (5 V)

• The module circuit MicroBoard M8
• Documentation for Atmega8A from the website of Atmel
• Memo technical Atmega8A - food