AVR 2 programmer compatible with USBasp ISP

The programmer "USBasp AVR" is fully compatible with the programmer "USBasp" created by Thomas Fischl. It can be used to program microcontrollers from the AVR family from ATMEL via the USB port of the PC. USBasp supports many popular environments for developing software and applications designed for downloading of programs, including: Bascom, AVRDude, WinAVR, and many others.

Unlike the previous version it has two popular programming connectors KANDA 10pin and 6pin (used, for example, inPololu 3pi robot). To use the programmer you only need cable USB A-Banddrivers. A detailed description of installation and operation is in the user's guide.

• J1 - FIRMWARE UPDATE- Jumper for software updates (must be taken during normal operation)
• J2 - Slow SCKjumper to slow down the frequency programming of the target system
• J3 - Supply target- Based jumper J3 powers up the system timer from the USB port (approx. 5 V)

• ATmega8, ATmega88, ATmega8515, ATmega8535, ATmega128, ATmega1280, ATmega1281, ATmega16 ,ATmega161, ATmega162, ATmega163, ATmega164, ATmega103, ATmega32, ATmega324, ATmega329, ATmega3290, ATmega48, ATmega64, ATmega640, ATmega644, ATmega649, ATmega6490, ATmega168, Atmega328
• ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny45, ATtiny84, ATtiny85
• AT90S2313, AT90S2333, AT90S1200,AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90CAN32, AT90CAN64, AT90CAN128

• Bascom AVR
• AVRDude
• WinAVR
• other

• The programmer has a polymer fuse (500 mA, reusable) securing the USB port of the computer
• The device allows you to power circuits with voltage 5V or 3.3 V (through a built-in stabilizer 3.3 V)
• Programming speed up to 5 KB/sec
• Works with the following operating systems: Windows XP, Windows Vista, Windows 7, Windows 8, Linux
• The programmer is easy to use, and two LEDs (red and green) allow to monitor device status

• The programmer is compatible with USBasp (visible in the photo above)
• 2 jumpers to configure the programmer

• The user manual for the programmer USBasp
• Drivers