DFRobot Beetle ESP32 v2.0 IoT - microcontroller with WiFi Bluetooth

Bestseller

Product Code:: 111100147

DFRobot Beetle ESP32 v2.0 IoT - microcontroller with WiFi Bluetooth

66 GEL

Brand DFRobot
Shipping from Poland
Post delivery June 23
Shipping cost for orders to Georgia from GEL 179

Properties

UC - USB: microUSB
UC - I2C: yes
UC - ядро: Tensilica, 2. Dual Core
UC - WiFi: yes
UC - UART: yes
UC - Разъем: 5V microUSB
UC - Вспышка: 16 MB
UC - аналог в: 4
UC - frequency: 240 MHz
UC - Bluetooth: yes
UC - microcontroller: ESP32
Выходное напряжение от: 3.3 V
Выходное напряжение до: 5.0 V

Features

Nominal output voltage: 3.3 V

General characteristics

UC - RAM: 520 kB
Voltage To: 3.5 V
Voltage From: 6.5 V
UC - SPI Interface: No
UC - Цифровые контакты: 4

Other features

Brand: DFRobot

Description

Beetle ESP32 is a smaller version of theFireBeetle board. Board based on moduleESP-WROOM-32D dual core Tensilica LX6 processor with the frequency of240 MHz. It has 520 KB of SRAM, 16 MB of Flash and the digital, analog, I2CandUART pins. The beetle has a built-in module Bluetooth 4.2andwi-fi.

The microcontroller is programmed in theArduino IDE. Instructions for setting up and sample program can be foundhere. The module is programmed and powered using the microUSB port.

Leads

The module has leads in the form of holes and panels for soldering. In addition, the power leads are marked respectively: 3V3 / VIN (+), GND (-).

Name Description 3V3 Supply voltage of 3.3 V. VIN Supply voltage from 3.5 V to 6.5 V. A0 - A3 Analog input. D2, D3, D4, D7 Digital I/O. SCL Clock line of the I2C bus. Traffic The data line of the I2C bus. RX The pin of the UART receiver. TX The pin of UART transmitter. Specification