TB6612 - two-channel 13.5V / 1.2A motor driver with connectors - Adafruit 2448

Description of product: Adafruit TB6612 dual - channel driver engines at 13.5 V/1.2 A with plugs

Dual-channel driver motors on the basis of the layout of theTB6612FNG, and is also necessary for the correct functioning of the passive components.Voltage motor power supplyisfrom 4.5 V to 13.5 Vandlogic voltagerangesfrom 2.7 V to 5 V.the Module allows control of twoDC motors (DC),stepper motoror to run twosolenoidswith the help of the module with a microcontroller, such asArduino.

The product is compatible withArduino

Auser manualwith the program for users ofArduino.

Insights Adafruit TB6612 dual - channel driver engines at 13.5 V/1.2 A with plugs

The Board has insights to which solder can goldpiny raster 2.54 mm. This simplifies the connection of the driver with the other elements.Voltage motors range from 4.5 V to 13.5 V and logic voltage ranges from 2.7 V to 5 V. the Module allows control of two DC motors (DC), stepper motor or to run two solenoids.

Power pins Pin Description Vmotor Contacts used to power the engines, not the pieces of the puzzle. Supply voltage is from 4.5 V to 13.5 V. VCC Power logic, Voltage ranges from 2.7 V to 5.5 V. GND The mass of the system common to the pieces of the puzzle and power engines. Contacts signal Pin Description INA1,INA2 The control inputs of the engine A. PWMA Input PWM engine. If you do not want, you can connect it to as higher logic. INB1,INB2 Inputs to the engine control B. PWMB Input PWM engine. If you do not want, you can connect it to as higher logic. STBY PIn to quickly turn off the motors connected to VCC through a resistor of 10 k?, To disable must be connected to GND. The outputs of the engines Pin Description According to the settings of your monitor Two outputs for the motor And drivenINA1, INA2andPWMA MotorB Two outputs for the motor And drivenINB1, INB2andPWMB Specification Adafruit TB6612 dual - channel driver engines at 13.5 V/1.2 A with plugs

• Food:
  • Part of the puzzle: from 2.7 V to 5.5 V
  • Motors: from 4.5 V to 13.5 V
• Driver:TB6612
• Current per channel: 1.2 A
• Instantaneous current per channel: 3 A
• Supported engines:
• • Two DC motors
  • One stepper motor
• Dimensions: 27 x 19 x 3 mm
• Weight: 1.8 g

Useful links

• The manufacturer's website Adafruit 2448
• Adafruit TB6612 driver DC motors
• Documentation TB6612
• Library driver