3D printer - Anycubic Photon Mono 2
- Артикул:
- 86822873
Характеристики
Общие характеристики
- 3D - тип распечатки
- UV - resin
- Скорость 3D - печати
- 50 mm/h
- Поверхность для 3D - печати
- 143x89x165mm
Прочие свойства
- Бренд
- Anycubic
Описание
3D printer from Anycubic, using light-curing resin to form prints. The LighTurbo matrix - an efficient source of UV light and a 6.6" monochrome display with a 4K+ resolution, covered with a scratch-resistant protective film, is responsible for its hardening. The dimensions of the working field of the Photon Mono 2 printer are 143 x 89 x 165 mm , and the maximum print volume is 2.09 L.
3D printer - Anycubic Photon Mono 2 - resin.
Photon Mono 2 compared to Photon Mono 4K.
The construction of Photon Mono 2 has the same dimensions as its predecessor Photon Mono 4K, but the print area has been increased. Its dimensions are 143 x 89 x 165 mm, and the maximum print volume is 2.09 L. This means that you can create larger projects without taking up too much space.
Photon Mono 2 uses a 6.6-inch monochrome LCD screen with a resolution of 4096 x 2560 px. Thanks to this, the obtained printouts are characterized by high detail and accuracy . The display is covered with a film that protects it from any scratches, as well as from accidental leakage of resin.
The protective film maintains a light transmittance of 95%, so it fully protects the screen while ensuring print accuracy.
The LightTurbo matrix evenly distributes the UV light.
The proprietary Anycubic LighTurbo lighting system provides a stable and uniform source of UV light , the intensity of which can reach 4200 μW / cm². Effectively reduces visible layer lines and prevents grid formation on printouts. Thanks to this, the printer is able to render more details of the model, and its surface becomes delicate and smooth.
The printer is equipped with a working platform made of aluminum alloy. A checkerboard pattern was engraved on its surface. This significantly increases the adhesion and thus the stability of the printed model. The risk of the printout peeling off or slipping off the platform is much lower.
Laser engraved working platform.
The printer uses a light-curing resin to form prints.
- Removable cover that effectively protects against UV radiation
- 2.8 inch touch control panel
- Updated Anycubic Photon Workshop 3.0 slicer with user-friendly interface
- Manual leveling of the platform in 4 points
- Manufacturer's website
- User manual