Bluno BLE Bluetooth 4.0 - compatible with Arduino
- Артикул:
- 99446841
Характеристики
- UC - I2C
- yes
- UC - USB
- microUSB
- UC - A/C
- 10-bit
- UC - PWM
- 6
- UC - UART
- yes
- UC - ядро
- 8-bit AVR, 1. Single Core
- UC - EEPROM
- 1 kB
- UC - частота
- 16 MHz
- UC - Вспышка
- 32 kB
- Напряжение от
- 12.0 V
- Напряжение до
- 7.0 V
- UC - аналог в
- 6
- UC - Bluetooth
- yes
- Интерфейс UC - SPI
- yes
- UC - Микроконтроллер
- ATmega328
- Выходное напряжение от
- 5.0 V
- Выходное напряжение до
- 5.0 V
- UC - Цифровые контакты
- 14
- UC - оперативная память
- 2 kB
Прочие свойства
- Бренд
- DFRobot
Энергопитание
- Номинальное выходное напряжение
- 5.0 V
Описание
Bluno is fully compatible with popular module Arduino Uno. This means that it can be programmed through the Arduino IDE using available libraries. The so-called Arduino Shield are also collaborating with the DFRobot module.
The board has a CC2540 chip by Texas Instruments which allows for communication in the Bluetooth 4.0 standard. Thanks to this functionality, the user can remotely program the Bluno (BLE) module, use AT commands and to update the software in a simple way.
The board contains the ATmega 328 microcontroller, equipped with 14 digital inputs/outputs, 6 of which can be used as PWM outputs (e.g. for motor control) and 6 as analog inputs. The system works with the clock signal with the frequency of 16 MHz. The module has also a USB connector, DC power socket, RESET button, and the leads used to connect the AVR programmer.
DFRobot company introduced colored connectors that facilitate the identification of the leads:
- red- power pins,
- blue - analog pins,
- green- pins digital.
In order to start Bluno, it is necessary to connect the system to computer usingmicroUSB cableand choose inthe Arduino IDE, the Arduino Uno board.
Power
The module can be powered via the USB cable and the external device, for example, the AC adapter, the battery or the rechargeable battery. Switching the power sources is automatic. The power supply is connected to a standard DC connector. Rechargeable battery or other source is connected to the pins of the POWER connector.
Programming
Creating and installing the software is allowed by the free environment of the Arduino IDE. Implemented bootloader allows you to send the program directly via USB cable. ISCP connector enables connection of an external AVR programmer. Bluno also has the capability of remote programming via Bluetooth (BLE).
Specification of Bluno BLE Bluetooth 4.0 - compatible with Arduino
- Supply voltage: 7 V to 12 V
- Leads operate at a voltage of 5 V
- Fully compatible with Arduino Uno
- Installed chip CC2540 by Texas Instrumets, compatible with Bluetooth 4.0 (documentation)
- The possibility of remote programming via Bluetooth (BLE)
- Support for Bluetooth HID
- Support for the AT command
- Support for iBeacons
- The Bluetooth range is 70 meters in open space thanks to built-in antenna
- Works with Android and iOS
- Microcontroller: ATmega 328
- Maximum clock frequency: 16 MHz
- SRAM: 2 KB
- Flash memory: 32 KB (4 KB is reserved for bootloader)
- EEPROM: 1 KB
- I/O Ports: 14
- PWM outputs: 6
- Number of analog inputs: 6 (channels of A/C converter)
- Serial interfaces: UART, SPI, I2C
- External interrupts
- Connector: micro USB slot, type B (USB cable not included)
- Soldered ISP connector
- Dimensions: 60 x 53 mm
- Weight: 30 g
In our offer is also designed for Bluno, Accessory Shield.
Useful links
- The website of the manufacturer: DFRobot DFR0267
- Wiki Doc Guide
- Arduino IDE software
- Documentation of the programming language
- FAQ
- Diagram of the module
- CC2540 system documentation
- Documentation for the Atmega328
