PLASTIMO Zinc Shaft Anode 22 mm

ZINC, compliant with MIL-A-18001K. Standard anodes protect elements common to all boats (shafts, hull.).Some anode models are specific to a motor or thruster brand (always refer to the manufacturer’s recommendations). Installation: -The anode must be in direct contact with the metal it protects : never paint around an anode or the anode itself. Do not fit magnesium anodes on wooden hulls as it would deteriorate the boat structure. Important: - On the opposite, anodes may dissolve quickly if they are bad quality or if there is an electrical failure on board (check the batteries, the right earth connection to the dock, the proper cathodic protection of your marina neighbours, ... ). Specifications: - Ø A: 35 mm - Ø B: 65 mm - H: 67 mm