WHEELS MANUFACTURING Bearing Extractor 25 mm

6805 (25mm) Sealed Bearing Extractor.

Individual extractor for removing 6805 sealed bearings with 25mm inside diameter.

These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component.

Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing.

Tap the extractor & bearing out together with a punch and hammer.

All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor.

If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.

Bearing extractor requires the following tools:(1) 17mm open or box end wrench.

(1) 1´´ open end wrench.

(1) Punch (diameter should be smaller than 25mm.).

(1) Hammer