3M Marine Adhesive Sealant 5200 29ml

3M Marine Adhesive Sealant 5200 is extremely strong and retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water. Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Center board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Wont sag or flow in vertical or horizontal seams. Benefits: - High performance polyurethane adhesive/sealant becomes tack-free in 48 hours, fast cure product in 1 hour - Strong seal retains strength above or below the water line - Excellent resistence to weathering and saltwater Specifications: - Application Method: Hand or pressure caulk - Brand: 3M - Capabilities: Sustainability - Consistency: Medium paste - Consumer Label: Yes - Container Volume: 0.1 Gallon, 1 fl oz (US), 3 fl oz (US), 5 Gallon - Cure Rate: 3 mm/24 hr, <1 mm/24 hr - Elongation: >800 Percent, >900 Percent - Hardness: 60 Shore A, 68 Shore A - Industries: Construction, General Industrial, Marine, Specialty Vehicle, Transportation - Product Form: Cartridge, Gallon, Tube - Skin Time: 60 - 120 Minute, >48 Hour - Solids Weight Percent (Approximate): 90 Percent, 95 Percent - Tack Free Time: 1 Hour, 48 Hour - Tensile Strength: 600 psi, 700 psi