A-Star 328PB Micro - 3.3V/8MHz - ATmega328 module - Pololu 3162

Bestseller

Product Code:: 47398505

A-Star 328PB Micro - 3.3V/8MHz - ATmega328 module - Pololu 3162

Out of stock

Brand Pololu

Properties

UC - RAM: 2 kB
UC - A/C: 10-bit
UC - PWM: 9
UC - I2C: yes
UC - USB: никто
UC - ядро: 8-bit AVR, 1. Single Core
UC - UART: yes
Voltage To: 3.8 V
UC - EEPROM: 1 kB
Voltage From: 15.0 V
UC - Вспышка: 32 kB
UC - аналог в: 8
UC - SPI Interface: yes
UC - microcontroller: ATmega328
Выходное напряжение от: 3.3 V
Выходное напряжение до: 3.3 V
UC - Цифровые контакты: 24

Features

Nominal output voltage: 3.3 V

Other features

Brand: Pololu

Description

A-star 328PB Micro is based on AVR ATmega 328PB microcontroller which, due to backward compatibility, can be a substitute for such modules as the Arduino Uno or Pro Mini equipped with old versions of this microcontroller so the programs written for these boards needs to work on it. It is equipped with 24 digital pins of input / output, 9 of which can be used as PWM outputs and 8 as analog inputs. The system works with voltages of 3.3 V, works with a clock signal with a frequency of 8 MHz.

Specification Supply voltage from 3.8 V to 15 V Microcontroller ATmega328PB I/O pins

PWM channels 9 Number of analog inputs 8 Interfaces IPS, USART, TWI LEDs 2 Buttons RESET

Compatibility with

the Arduino IDE

YES ICSP connector YES Goldpin connectors included YES Dimensions 1.8 x 3,30 x 0.25 cm Weight 1.5 g (without connectors)

The module has no soldered goldpin connectors (included) so the user decides which leads will be needed so the board can maintain its small size.

Insights Power

The module can be powered with the voltage from 3.8 V to 15 V by connecting it to the VIN lead which is connected with stabilizer.

In our offer, you will find compatible power supplies.

Inputs / Outputs

A-Star has 24 digital outputs input/output (I/O). In addition to standard I/O, some of the leads also have special functions. It may be supported by using interfaces: IPS, USART, TWI

Programming

Creating and downloading software, is allowed by the free environment of the Arduino IDE. Implemented bootloader allows you to send the program through the USB-UART converter, via the ISP pins using the AVR programmer.

Details in the documentation of ATmega 328PB

Useful links