A01NYUB ultrasonic distance sensor 28-750cm - waterproof - DFRobot SEN0313

An ultrasonic sensor that measures by calculating the time between sending and receiving a pulse.A01NYUBis a high quality water and dust resistant sensor. The sensor can measure distancesfrom 28 cm to 750 cm. It communicates through theUARTinterface and its supply voltage isbetween 3.3 V and 5 V. The module is enclosed in a sealed enclosure withIP67class.

Ultrasonic distance sensor A01NYUB - cable adapter for BLC female connectors included.

The sensor is encapsulated in a sealed IP67 enclosure that effectively protects it from water and dust so that it can be used for distance measurements in difficult conditions.

Product compatible with Arduinoand RaspberryPi

The manufacturer has prepared auser guidewith sample programs for Arduino and Raspberry Pi.

The chip communicates through a UART interface with a bandwidth of 9600 b/s, so it is compatible with most of the startup sets, including Arduino andRaspberryPi.

Example of sensor connection with Arduino.

• Operating voltages: 3.3 V to 5 V
• Average power consumption: 15 mA
• Dead zone: 28 cm
• Measurement range: from 28 cm to 750 cm
• Communication: UART
• Response time: 100 ms
• Probe centre frequency: 40 kHz ± 1 kHz
• Operating temperature: -15°C to 60°C
• Storage temperature: from -25°C to 80°C
• Measuring angle: 55°
• Measuring angle without handle: 40°
• Leakage class: IP67

Sensor dimensions.

• The manufacturer's website: DFRobot SEN0313
• User guide