Adafruit Cyberdeck HAT - GPIO adapter for Raspberry Pi 400 - Adafruit 4863

The Cyberdeck board from Adafruit is equipped with two 40-pin connectors , one straight and one angled , which are used to lead the pins out of the Raspberry Pi 400 minicomputer at a slight angle, thus facilitating access to them. As standard, in the Raspberry Pi 400, access to the GPIO is difficult due to their location in the keyboard at an angle of 90 °. This solution allows you to put on the board, for example, LCD screens mounted directly on the GPIO of the Raspberry Pi with a diagonal of up to 4.0 ". Thanks to the adapter, you can also mount other covers, such as, for example, HiFi sound cards or the official Sense HAT . Qwiic / Stemma QT connectors and two Stemma JST 3-pin connectors, which correspond to the GPIO13 and GPIO18 pins. more information can be found in the user guide .

• Two GPIO connectors with a soldered female strip with 40 pins
• Two Qwiic / Stemma QT connectors
• Two Stemma JST 3-pin connectors corresponding to GPIO pins 13 and 18
• 4 mounting holes
• Mounted angled connector to be plugged into the GPIO connectors of the Raspberry Pi 400
• Soldering is not required
• Dimensions: 65.15 x 77.47 mm

• The website of the manufacturer: Adafruit 4863
• User Guide