Adafruit ESP32-S2 Reverse TFT Feather
- Product Code:
- 121893875
Properties
- UC - I2C
- yes
- UC - USB
- USB C
- UC - WiFi
- yes
- UC - ядро
- 1. Single Core
- UC - Вспышка
- 4 MB
- UC - frequency
- 240 MHz
- UC - microcontroller
- ESP32-S2
Other features
- Brand
- Adafruit
Description
ESP32-S2 Feather Reverse is a board with a built-in TFT display from Adafruit . It retains all the characteristic features of Feather modules, offers the user an efficient ESP32-S2 microcontroller with WiFi communication and a clear TFT display with a resolution of 240 x 135 pixels , which is located on the back of the board. It has a native USB port, 4 MB Flash memory and 2 MB PSRAM memory, perfect for working with CircuitPython or Arduino . Thanks to the native USB port, it can be used as a keyboard, mouse or MIDI device. The color TFT display uses the SPI interface and consumes only 100 uA of current in deep sleep mode.
The manufacturer has prepared a detailed user guide , which makes it much easier to start working with the module.
- Modern ESP32-S2 processor with native USB, enabling various applications
- A small, FCC/CE certified module with ample memory, perfect for handling large amounts of data
- Bright and colorful IPS TFT display, readable from any angle
- Possibility of power supply via USB type C connector
- Li-Pol battery monitoring
- Reset and DFU buttons and a serial debug pin
- STEMMA QT connector for easy integration with I2C devices
- Low energy consumption
- Intuitive LEDs informing the user about the module's operating status
Our offer also includes other products from Adafruit - check it out!
- USB Type-C port
- Li-Pol battery connector/charger
- CHG LED
- GND
- WHIP
- USB - with positive voltage
- PL - pin enabling the 3.3 V regulator
- 3.3V regulator output pins
Arrangement of pins on the board.
- On-board MCU: ESP32-S2
- Tensilica 240 MHz processor
- Wireless WiFi communication
- 4 MB Flash memory and 2 MB PSRAM memory
- Color TFT display with a resolution of 240 x 135 px
- Power supply: USB Type C or Li-Pol battery
- MAX17048 system monitoring battery operation (when powered by a Li-Pol battery)
- Reset and DFU buttons (BOOT0)
- STEMMA QT connector for I2C devices
- LEDs indicating the module's operating and charging status (also NeoPixel support)
- Low power consumption up to 100 uA in sleep mode when powered by battery
- Compatible with Arduino or CircuitPython
- Dimensions: 52 x 23 x 9.7 mm
- Weight: 8.2 g
- Producer's website
- User Guide
