APEKS MTX-R SD Regulator Set

The MTX-R sidemount set is a super tough, rugged, high performance, go anywhere sidemount regulator configuration designed to meet the rigours of cold water and extreme sidemount diving. The MTX-R is highly reliable and also very easy to service out in the field which make it an ideal choice for the expedition and exploration diver. Features: First stages: - Over balanced for superior performance. - Compact environmentally sealed diaphragm system completely eliminating the maintenance issues associated with silicone, oil or grease filling. - Recommended for frequent use in cold or contaminated water. - Environmental over-moulded endcap & diaphragm that helps prevent ice build-up that can cause first stage free flow in extreme - circumstances. Also protects the first stage from impact damage. - Double swivel hose for greater freedom of movement and comfort. - 5 x 3/8” UNF medium pressure ports & 2 x 7/16” UNF high pressure ports. - The 5th 3/8” UNF medium pressure port includes a protective bumper when not in use. - Forged first stage body with heat exchanging ribs for maximum thermal performance. - Angled HP ports for optimal hose routing and fitting transmitters. - Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation. - Tested for Octopus use - EN250A to 60 meters cold water. - Nitrox/Oxygen compatible Second stages: - Simple to use with no dive controls, pre-settable cracking effort or venturi control by an Apeks approved qualified technician. - High performance pneumatically balanced lever operated poppet valve. - Large diver friendly self-flushing controllable purge button. - Front cover with over-moulded elastomer bumpers incorporates a formed chrome plated brass plate improving durability of the demand valve. - Large protective elastomer bumpers on the side and on the top to protect the demand valve from impacts and scratches in the most - vulnerable places. - Reversible second stage for either a left or right-hand gas supply. - Hard wearing, satin chrome. - All gas contact moulded parts are produced using an active protection additive that kills MRSA, protects against E-Coli, bacteria and - fungi, and is also very effective against viruses, mold, yeast and algae. - Large heat exchanger fitted to help reduce second stage freezing. - Nitrox/Oxygen compatible - Kit Contents - 2 ea. DPT DIN 1st stages with 5 port swivel turrets. - 2 ea. MTX-R second stages. - 210cm double swivel hose. - 61cm double swivel hose - 2 ea. 25cm length MP inflation hoses (one for buoyancy system, one for drysuit) - 2 ea. TEK pressure gauges with 18cm hoses - 1 ea. 90° elbow fitting - 1 ea. bungee necklace - 1 ea. bungee clip - 1 ea. stainless steel bolt snap - 2 sets of short exhaust ports - Regulator bag - Setup illustration, CD manual and quick start guide Specifications: - Connections DIN only - Type of first stage Over-balanced diaphragm design, environmentally sealed - Body Type Forged first stage body with heat exchanging ribs for maximum thermal performance. - Number of HP ports 2 (7/16´´ UNF) per first stage - Number of MP ports 5 (3/8´´ UNF) per first stage - Environmental Dry Kit Standard - First stage exterior Satin chrome - Orientation Convertible LH or RH - Coldwater Use Yes - Type of second stage Pneumatically balanced - Opening Effort Control Knob No - Integrated Venturi Lever No - Mouthpiece Comfo-bite™ - Exhaust tee Diver Changeable - comes with 2 sets - Heat Exchanger for freezing resistance Yes - Hose type Rubber breathing hoses and braided flexi inflator hoses - Nitrox compatibleYes to 40% O2 when new, out of the box / Can be O2 cleaned to 100%. - Gauge face Tempered glass - Over-pressure relief on gauge back Yes