BleBox ThermoBox - WiFi heating controller - Android / iOS app
- Product Code:
- 42761619
Properties
Other features
- Brand
- Blebox
Protocols
- Communication
- WiFi
Description
Ready to use controller BleBoxThermoBoxdesigned for intelligentcontrol of heating or cooling roomswith the possibility of using twodigitaltemperature probes. Module can be connected topotential or potential-freeconnectors. Allows you to control radiators, floor heating, pool heaters, central water heating, central furnaces and more. It communicates with wirelessWiFinetwork using wBox application for Android and iOS devices from any place in the world. Small dimensions of the module allow for installing it in a flush mounted box or receiver housing. Controller is equipped with screw connectors to connect the wires.
- Yearly history of temperature measurements
- Can operate as a stand-alone device
- Potential or potential-free connection
- Measurement of electricity consumption possible
- Convenient application interface
- Working range of the probe from -50°C to 125°C
- Schedule setting possible
- Boost mode
Before installing the controller should make sure that thepower supply circuit has been disconnected.The controller should be mounted in a place protected from access of third parties. The small dimensions of the module allow it to be placed in a deep flush-mounted box or housing of the receiver.
The module hasnine leadsto connect the receiver and the temperature probe. All leads were transferred toscrewterminals, where you should connect the wires using ascrewdriver.
- R2- relay output
- R1- relay output
- L- power supply, phase line
- IN- input for connecting monostable switch (bell switch)
- N- power supply, neutral/ground line
After a successful installation of the controller BleBox a new WiFi network will be visible, named"thermoBox-xxxxxxxx" where "xxxxxxxx" is a serial number of the device. After connecting to the network, open thewBoxapplication. At the top of the screen you will see the device, next to the name there will be a "+" sign. To configure the device click on the default device name.
Configuration can also be done using aweb browser. After connecting to the controller's network and typing www.blebox.eu into the search address field, the BleBox controller configuration page will appear.
- Manufacturer's website
- User manual