Camera module OV2640 2MPx 1622x1200px 60fps - Waveshare 8532

Description

Module with 2 MPx camera with resolution of 1622 x 1200 px and the frequency of up to 60 frames per second. It extends the capabilities of the microcontroller with the ability to shoot photos and record videos. The device operates with a voltage of 3.3 V.

The product is compatible with STM32 and AVR

The manufacturer has prepared a user guide along witha sample program for the STM32.

 

Specification

• Supply voltage: 3.3 V
• The operating voltage of the pins: from 1.7 V to 3.3 V
• Resolution: 1622 x 1200 pixels (2 MPx)
• Lens size: 1/4 "
• Sensitivity: 0.6 V/(lux*sec)
• View angle: 25 ° (non-linear)
• Output formats:
  • YUV(422/420)/YCnCr422
  • RGB 565/555
  • 8-bit compressed data
• Maximum speed:
  • UXGA / SXGA: 15 fps / 30 fps
  • VGA: 30 fps
  • CIF: 60 fps
• Module dimensions: 35 x 24 mm

 

Pins

The device has soldered 18-pin, double row connector with the pitch of 2.54 mm.

Pin Description 3.3 V Supply voltage is 3.3 V. GND The ground of the system. SIOC The clock input of the serial interface. SIOD Serial interface of I/O data. VSYNC Vertical synchronization. HREF The HREF output. PCLK The clock output of the matrix. XCLK The input of the system clock. D7 The output of video data - bit 7. D6 The output of video data -bit 6. D5 The output of video data -bit 5. D4 The output of video data - bit 4. D3 The output of video data - bit 3. D2 The output of video data - bit 2. D1 The output of video data - bit 1. D0 The output of video data - bit 0. RESET The system reset is activated with the low status. PWDN Disabling the system is activated by the high status.

 

Useful links

• The website of the manufacturer of Waveshare
• Diagram of the module
• Sample program for STM32
• Description of the module OV2640
• Technical documentation of the module OV2640