Properties
- Измеритель частоты
- No
- Измеритель емкости
- No
- Счетчик - Подсветка
- No
- Измеритель температуры
- No
- Измеритель сопротивления
- yes
- Измеритель индуктивности
- No
- Счетчик - Хранение данных
- yes
- Измеритель - Тестер батареи
- No
- Измеритель переменного тока
- yes
- Измеритель постоянного тока
- No
- Измерительно - диодный тестер
- yes
- Измеритель постоянного напряжения
- yes
- Измеритель - переменное напряжение
- yes
- Измерительно - транзисторный тестер
- No
- Измеритель - Автоматический диапазон
- yes
General characteristics
- Метр - звук
- No
Other features
- Brand
- REBEL
Description
Product description: Rebel RB-202 Clamp Meter
Clampmeterenables measurement of AC current using current clamps. Thanks to this it is possible to make measurements without cutting the cable and connecting ammeter. The multimeter also allows to measure parameters such as: DC voltage, AC voltage and resistance. It can also be used to test circuit continuity and diodes. The device is equipped with a Data Hold function that allows you to keep the last displayed measurement, a MAX function that allows you to determine the maximum value that was achieved during the measurement and a low battery warning system.
Batteries for powering the device are included.
The set also includes a case for easy storage of the meter.
Features of the RB-202 meter
- Manual and automatic change of measuring ranges
- Current measurement by current clamps
- Data Hold function
- Automatic polarity detection
- Sampling frequency 2 times per second
- Maximum reading on the display: 1999
- Battery power supply 2 xAAA
Technical specification
Parameter
Range
DC voltage
200 mV / 2 V / 20 V / 200 V / 600 V
AC voltage
200 mV / 2 V / 20 V / 200 V / 600 V
DC DC current
no
AC alternating current
2 A / 20 A / 200 A / 400 A
Resistance
200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ / 20 MΩ
Capacitance
no
Frequency
no
Automatic range selection
yes
Standby mode
no
Transistor tester
no
Circuit continuity tester
yes
Temperature measurement
no
Diode tester
yes
Battery tester
no
Display
LCD 35 x 18 mm
Power supply
2 x AAA battery (included)
Dimensions
210 x 76 x 25 mm
Weight
194 g