COOL MAKER Cool Stitch N Style Fashion Studio doll
Bestseller
- Product Code:
- 135968407
169 GEL
Properties
Design
- Color
- Multicolor
Other features
- Brand
- Cool Maker
Description
Design and stitch your own projects with the Cool Maker Stitch N´ Style machine! This easy-to-use sewing machine comes with everything you need to create different projects, including plushie, purse, belt bag, sunglasses case and more! How to create a cool Sunclasses case:Cut out desired project (use safety scissors, not included).
Fold edge of fabric towards back side.
TIP:Use Sewing Clips to keep fabric together.
Align the Stitch Line on the fabric to the Stitch Guide on the machine.
When ready, slide the PLAY/PAUSE switch up to PLAY to start sewing.
Guide fabric with hand and let the Presser Foot automatically push the fabric forward.
Machine will automatically stop before the fabric edge, around 0,5 cm.
This prevents thread from unraveling.
Hold up Foot Lifter and remove fabric.
Unlock Cutting Tab.
Fold in half so front pattern is on the inside.
Use Sewing Clips to hold sides together and repeat Steps 3 to 9 (on picture) for the other two seams.
TIPS:If your machine stops sewing, make sure the fabric is placed more to the RIGHT side of the Stitch Guide line so the Fabric Sensor sees the fabric.
Use the PLAY/PAUSE switch to START and STOP while sewing.
IMPORTANT:Do not push or pull the fabric while sewing.
Slide Cutting Tab back until it locks into place.
Cut exposed thread.
This will prevent stitches from unraveling.
Do not cut near needle or stitches will unravel.
Always use Cutting Tab to cut thread and lock stitches.
When fabric is placed near the needle, the machine will make one short beep then start sewing automatically.
Save all scrap fabric for Plushie project later.
Fold edge of fabric towards back side.
TIP:Use Sewing Clips to keep fabric together.
Align the Stitch Line on the fabric to the Stitch Guide on the machine.
When ready, slide the PLAY/PAUSE switch up to PLAY to start sewing.
Guide fabric with hand and let the Presser Foot automatically push the fabric forward.
Machine will automatically stop before the fabric edge, around 0,5 cm.
This prevents thread from unraveling.
Hold up Foot Lifter and remove fabric.
Unlock Cutting Tab.
Fold in half so front pattern is on the inside.
Use Sewing Clips to hold sides together and repeat Steps 3 to 9 (on picture) for the other two seams.
TIPS:If your machine stops sewing, make sure the fabric is placed more to the RIGHT side of the Stitch Guide line so the Fabric Sensor sees the fabric.
Use the PLAY/PAUSE switch to START and STOP while sewing.
IMPORTANT:Do not push or pull the fabric while sewing.
Slide Cutting Tab back until it locks into place.
Cut exposed thread.
This will prevent stitches from unraveling.
Do not cut near needle or stitches will unravel.
Always use Cutting Tab to cut thread and lock stitches.
When fabric is placed near the needle, the machine will make one short beep then start sewing automatically.
Save all scrap fabric for Plushie project later.
