Capacitive touch screen LCD 7 '' 1024x600px HDMI + USB

Touch screen, capacitive 7" for minicomputers Raspberry Pi, LattePanda and other HDMI devices. Display resolution up to 1024 x 600 pixels. Touch screen supports up to 5 touches at once. It is powered by USB port, no need of external power supply. The screen works with Windows, Linux, MAC OS. The screen also has a special hole for mountingthe Arduino.

The screen requires no external power supply, it can be powered via the USB and HDMIconnectors. The display has a backlight adjustment via the potentiometer located on the rear side.

Before connecting an external power source, make sure that the current delivery of the power supplyis not less than 1.5 A / 5 V during powering the Raspberry Pi. Lower performance would reduce the touch sensitivity.

• Working voltage: 5 V
• Current: 160 mA (when connected to HDMI)
• Max current: 1200 mA
• Refresh frequency: 43 Hz (60 Hz is not recommended, the image will not be displayed on entire screen)
• Display's resolution: 1024 x 600 px
• Video interface: HDMI
• Dimensions: 183 x 100 mm
• Dimensions of mounting holes: 3.1 x 6 mm
• Weight: 328 g

• 1x 7" screen with capacitive touch

• The website of theDFRobot DFR0506 manufacturer
• Wiki Guide