DFRobot Gravity: Digital shake sensor
Bestseller
- Product Code:
- 111100217
Out of stock
Properties
Other features
- Brand
- DFRobot
Description
Description
The shock sensor reacts to movement in a certain direction, so it can detect, for example, a hand movement. It is equipped with a vibration switch, spring type which serves to output the pulses of the low status. The module is compatible with Arduino andMicro:bit.
The product is compatible with Arduino and Micro:bit
Sample code and detailed information can be found inthe user guide.
PinsThe module is equipped with a digital interface, at a time when the sensor detects movement, it indicates the impulse of the low status and starts the built-in diode.
Pin Description PWR The power indicator (red), is enabled after turing on the power supply GND The ground of the system VCC Supply voltage from 3.3 V to 5 V D The digital output - low when motion is detected ON The indicator of the shock (blue), turns on when movement is detected Specification- Supply voltage: from 3.3 V to 5 V
- The switch's service life: more than 200 000 uses
- Interface: digital
- Dimensions: 30 x 22 mm
- The website of the manufacturer of DFRobot SEN0289
- User manual
- Diagram of the module