DFRobot Leonardo XBee socket - compatible with Arduino

Bestseller

Product Code:: 99446826

DFRobot Leonardo XBee socket - compatible with Arduino

79 GEL

Brand DFRobot
Shipping from Poland
Post delivery July 20
Shipping cost for orders to Georgia from GEL 176

Properties

UC - I2C: yes
UC - USB: microUSB
UC - RAM: 2,5 kB
UC - A/C: 10-bit
UC - UART: yes
UC - ядро: 8-bit AVR, 1. Single Core
Voltage To: 7.0 V
UC - EEPROM: 1 kB
Voltage From: 12.0 V
UC - Вспышка: 32 kB
UC - frequency: 16 MHz
UC - SPI Interface: yes
UC - microcontroller: Atmega32U4
Выходное напряжение от: 5.0 V
Выходное напряжение до: 5.0 V

General characteristics

UC - PWM: 7
UC - аналог в: 12
UC - Цифровые контакты: 20

Other features

Brand: DFRobot
Nominal output voltage: 5.0 V

Description

DFRduino is fully compatible with popular module of Arduino Leonardo. This means that it can be programmed throughthe Arduino IDEusing available libraries. The so-calledArduino Shields will also work with the DFRobot module.

The board contains an ATmega32u4 microcontroller, equipped with 20 digital inputs/outputs, 7 of which can be used as PWM outputs (e.g. for motor control) and 12 as analog inputs. The system works with the clock signal with the frequency of 16 MHz. The module also has a microUSB connector, DC power socket, RESET button and leads that serve to connect the AVR programmer.

An additional advantage is the connector forXBee wireless communicationthat allows to directly attach the module to the board.

DFRobot company introduced colored connectors that facilitate the identification of the leads:

red- power pins,
blue - analog pins
green- digital pins.

In order to start DFRduino, it is necessary to connect the system to computer using microUSB cable and choose inthe Arduino IDE, the Arduino Leonardo board.

Power

The module can be powered viamicroUSB cableand an external device, for example, the AC adapter, the battery or the rechargeable battery. Switching power sources is automatic. The power supply is connected to a standard DC connector. Rechargeable battery or other source should be connected to the pins of the POWER connector.

Programming

Creating and installing the software is allowed by the free environment of the Arduino IDE. Implemented bootloader allows you to send the program directly viaUSB cable. ISCP connector enables connection of an externalAVR programmer. A detailed description can be found in thedocumentationandtutorial.

Specification