E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084

Bestseller

Product Code:: 42763710

E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084

92 GEL

Brand waveshare
Shipping from Poland
Post delivery July 17
Shipping cost for orders to Georgia from GEL 117

Properties

Display

Touchscreen: No
(image-) diagonal: 2.13'', 2.13''
Screen resolution: 212x104px

Features

Product Type: Аксессуары для микрокомпьютеров

Other features

Brand: waveshare

Экран

Screen Display: e-paper

Description

Shield for Raspberry Pi witha flexible display e-paper of 2.13 "with a resolution of212 x 104 pixels. It is connected directly to GPIO pins. It communicates viaSPIinterface.It supports partial updates.Compared to standard displays of e-Paper, this flexible display isresistant to damage, islighter and thinner.

The subject of the sale is a shield with display, minicomputerRaspberry Pican be purchased separately.

The display is characterized by a very low power consumption, wide viewing angle, clear image without electricity, it is the ideal choice in the case when you need to use the screen on a curved surface.

Key features

It does not have a backlight, it will show the latest image for a long time in the case of lacking power
Very low current consumption, it is only necessary for updating
Compatible with Raspberry Pi Zero / Zero W / Zero WH / 3B+ / 3B / 2B
Reserved soldered connector for the SPI interface, for connection with other devices like Arduino / Nucleo, etc.

Insights

The device has a 9-pin connector.

Pin Description VCC Supply voltage: 3.3 V or 5 V. GND The ground of the system. NC Not connected. DIN Pin MOSI of SPI interface. CLK Clock pin of SPI interface. CS Chip select is activated by low status. DC

Selection data / command.

High status - data

Low status - commands

RST External reset is activated by low status. BUSY "Busy" status output, activated by the low status. Specification