Filament Devil Design ASA 1,75mm 1kg - Race Green

Product description: Devil Design ASA 1,75 mm 1 kg - Race Green

ASA Filament is a thermoplastic plastic in the form of fiber, usedfor 3D printing by FFF. The material iswound on a spool and vacuum packed with moisture absorber. Spool contains 1 kg of filament net. Devil Design ASA can be used in all FFF printers which are not protected against using material from external supplier and "open source" constructions. ASA is a material with increased (in relation to ABS) resistance to external factors, easily undergoes mechanical processing such as grinding or drilling. ASA is a perfect substitute for typical ABS copolymer.

In our offer of filaments you will also find other materials and colors.

Devil Design ASA 1,75 mm 1 kg - Race Green.

Properties of ASA filament

• During printing, the smell of melted plastic is noticeable
• More durable material than PLA
• Easy to grind, you can easily drill holes in it
• It is inexpensive and available in many color variants
• Increased resistance to UV radiation
• Increased resistance to weathering
• Good chemical and thermal resistance

Suggested parameters for printing with the filament Head temperature From 230°C to 240°C Table temperature 90°C to 100°C Print cooling Not recommended Due to differences in printer construction, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Technical specification and physical properties of Devil Design ASA felt Parameter Range Filament diameter 1,75 mm Colour Race Green Dimensional tolerance of the filament +/- 0.05 mm Roundness of the filament +/- 0,03 mm Material surface Slight glossiness Material shrinkage Large Product weight 1.0 kg net, 1.36 kg gross Spool material Transparent polycarbonate Weight of empty spool ~ 250 g Spool diameter 200 mm Spool width ~ 70 mm Mounting hole diameter 52 mm Packaging Printed carton Package dimensions ~ 205 x 205 x 80 mm Vacuum packaging Yes Moisture absorber Yes Filament Devil Design ASA 1,75 mm 1 kg

ASA Filament produced by Devil Design company has the centre of gravity equal to 1,07 g/cm³ (ASTM D792 method). The softening point of the thermoplastic material, in turn, tested using the ASTM D1525 method, is 96℃. The manufacturer specified a Rockwell R hardness of 107.

ASA filaments have a maximum tensile strength at break of no more than 20%. And their tensile strength, tested using the ASTM D638 method, is as high as 500 kg/cm². After cooling down, the printout can be easily detached from the table, without the risk of damage.

Additional information about the Devil Design ASA felt

The described thermoplastic material is soluble in acetone. 3D printing with the use of ASA felt is relatively simple, therefore, they are willingly chosen by both beginners and experienced users of 3D printers.

Due to their properties, ASA filaments are characterized by universal application. High accuracy of models, combined with a slight gloss make them ideal for printing decorative elements. Moreover, ASA material is used for prototyping, printing housings and various accessories.

Useful links

• Devil Design manufacturer website
• What is 3D printing?
• Filaments in 3D printing
• Product card
• MSDS-ASA card