Filament Devil Design PETG 1,75mm 2kg - Gray

Description: Filament Devil Design PETG 1.75 mm 2 kg - Gray

ThePETGcartridge for3D printersingrey, sold on a 200 mm diameter spool, has a net weight of 1 kg. The diameter of the cartridge is1.75 mm. The product is compatible with 3D printers that do not have built-in security features preventing the use of cartridges from external suppliers. It is also used with open source devices. The PET-G filter requires the use of a heated table. The manufacturer also recommends cooling the printout.

In our offer of filaments you will also find other materials and colors.

Advantages ofthe PETG pillar

• Odourless
• Flexible
• Waterproof
• It is distinguished by its low material shrinkage
• The surface is glossy
• Resistant to abrasion and damage

Filament Devil Design PET-G 1.75 mm 2 kg - grey.

Suggested print parameters of the filament Printing temperature From 220°C to 250°C Table temperature From 70°C to 80°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Technical specifications and physical properties of the Devil Design pillar Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,05 mm Colour Grey Printing temperature From 220°C to 250°C Table temperature From 70°C to 80°C Spool - material PET-G Reel diameter 310 mm Reel width 100 mm Mounting hole diameter 50 mm Package Carton Moisture absorber Yes Vacuum packing No Roundness +/- 0,02 mm Packaging dimensions 310 x 310 x 110 mm Net weight 2 kg Useful links

• Devil Design manufacturer's website
• What is 3D printing
• Filaments in 3D printing