Filament Devil Design PLA 1,75mm 1kg - Dark Gray

Product description: Filament Devil Design PLA 1.75 mm 1 kg - Dark Gray

Filament of Devil Design brand indark greycolour with a diameter of1.75 mm, wound on reels of 1 kg net weight. Vacuum packed with the addition of a moisture absorber. Devil Design filters are designed for all3D printers, working in FFF / FDM technology, unprotected against the use of cartridges from another company and for open source devices. Suggested printout parameters using the described filter are: head temperature between 200°Cand 235°C andtabletemperaturefrom 50°C to 60°C. The manufacturer recommends cooling the printout.

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PLA 1.75 mm 1 kg - dark grey.

Properties of the PLA pillar

The thermoplastic polyester filament is produced, among other things, from renewable raw materials, thanks to which it is biodegradable.Moreover, PLA is distinguished by a very low shrinkage of the material and increased resistancetoUV rays. Due to its minimal water absorption, it is used, among others, for the production of food packaging, surgical threads and even implants. The described filament is characterized by a poorly perceptible smell. What is more, it is not flammable, which significantly increases work safety. PLA is a material fully waterproof and characterized by high warpage resistance and durability. Due to its properties and ease of use,PLAfilament is intended, among others, for beginner users of 3D printers.

Suggested print parameters for filament Printing temperature From 200°C to 235°C Table temperature From 50°C to 60°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Technical specifications and physical properties of the Devil Design pillar Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,05 mm Colour Dark Grey Printing temperature From 200°C to 235°C Table temperature From 50°C to 60°C Spool - material PLA Reel diameter 200 mm Reel width 70 mm Mounting hole diameter 52 mm Package Printed carton Moisture absorber Yes Vacuum packing Yes Roundness +/- 0,02 mm Packaging dimensions 205 x 205 x 80 mm Net weight 1 kg Useful links

• Devil Design manufacturer's website
• What is 3D printing
• Filaments in 3D printing
• Product card