Filament Fiberlogy Easy PLA 1,75mm 0,85kg - Yellow

Description: Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Yellow

A cartridge from Fiberlogy in yellow, for 3D printers. Wrappedon reels of 200 mm diameter and vacuum-packed with a moisture absorber. The PLA filter is designed for all 3D printers that do not have protection against the use of cartridges from external manufacturers and for open source devices. Suggested printout parameters using the described filter are: head temperature between 200°C and 230°C and table temperature from 50°C to 70°C. The diameter of the pillar is 1.75 mm,net weight 0.85 kg. The Easy PLA filter can be used e.g. for printing various types of prototypes, toys, decorations, jewellery etc. The spool on which the filament is wound is in two different versions sent randomly.

In our offer of filaments you will also find other materials and colors.

Filament Fiberlogy Easy PLA 1,75 mm 0,85 kg - Yellow.

Properties ofthe PLApillar

The PLA filament is produced from the highest quality renewable raw materials and is therefore biodegradable. It is distinguished by its low material shrinkage. Due to its minimal water absorption, it is used, among others, for the production of food containers, surgical threads or implants. The filter has a low odour. It is not flammable. It combines each layer of material very well during printing. PLA is a fullywaterproofand highly warp-resistant material, it is durable. Due to its properties and ease of use, it is designed for beginner users of 3D printers.

Suggested print parameters for filament Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Cooling the printout Recommended Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. Technical specifications and physical properties of the pillar Parameter Scope Diameter of pillar 1.75 mm Dimensional tolerances of the philanthropy +/- 0,02 mm Colour Yellow Printing temperature From 200°C to 230°C Table temperature From 50°C to 70°C Spool - material Easy PLA Reel diameter 200 mm Reel width 80 mm Mounting hole diameter 52 mm Moisture absorber Yes Vacuum packing Yes Roundness +/- 0.01 mm Packaging dimensions 205 x 205 x 90 mm Net weight 0.85 kg Example prints from the Easy PLA pillar

Sample prints.

Useful links

• Fiberlogy manufacturer's website
• What is 3D printing
• Filaments in 3D printing
• Product specifications