Flame sensor - 760-1100nm - Iduino SE060
Bestseller
- Product Code:
- 42758197
-0%
11 GEL
Old price
Properties
- Датчик - Температура от
- -40 °C - 120 °C, 40 °C - 120 °C
- Датчик - Температура до
- 85 °C
Other features
- Brand
- Iduino
- Transducer Type
- flames
Ports & interfaces
- Connection
- Digital I / O
Description
Product description: The flame sensor Iduino 760 - 1100 nm
The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5 V. The range of the detected wave is from 760 nm to 1100 nm, detection angle is 60 °. The detection sensitivity is adjustable via potentiometer. The output is a digital or analog signal.
Connecting the flame sensorThe module is equipped with 4 pins in the form of the goldpin pins. It has digital and analog output signal, it communicates with any device equipped with a microcontroller, e.g.an Arduino.
Pin Description A0 Analog output signal. D0 The digital output signal. + Supply voltage of 5 V (for analog), 3.3 V (for digital). GND The ground of the system. Specification of the flame sensor- Supply voltage: from 3.3 V to 5 V
- Communication: digital or analog
- The detection range of waves: from 760 nm to 1100 nm
- Detection angle: 60°
- Adjustable sensitivity
- Operating temperature: -40°C to 85°C
- Operating humidity: 30% to 90%
- Storage temperature: from -5°C to 30°C
- Storage humidity: 20% to 75%
- Dimensions: 47 x 15 x 13 mm
- The manufacturer's website