FORBOT - a powerful 40mm fan for the case for Raspberry Pi 3B/4B

Optional package to extend the possibilities ofthe Raspberry Pi from FORBOT. The set includes a new top flap with ventilation holes, a 5V fan and a set of polyamide mounting elements. Depending on the needs, the fan can extract hot air from the enclosure or pump fresh air from the environment inside. The new flap is also equipped with holes for easy access to the GPIO and to lead out the Raspberry Pi connection tape with a dedicated camera. Depending on the needs, the fan can be screwed in or out.

Comparison of the temperature of Raspberry Pi when performing the all-core load test. As you can see, the use of a fan has significantly lowered the CPU temperature and reduced the calculation time needed to complete the test:

The fan should be connected to GPIO RPi pins (5V and GND). Installation does not require soldering, there are suitable connectors on the wires. This product can be mounted in FORBOT housings for Raspberry Pi version 3 and 4.

The airflow generated by the included, efficient fan generates a clearly audible sound!

NOTE!

The set includes the fan, the upper flap and mounting elements (this is not a complete enclosure).

The way the fan is connected.

Assembled casing. Raspberry Pi is available separately.

• Number of turns: 6000 rpm
• Power: 800 mW
• Capacity: 11 m3/h
• Dimensions : 40 x 40 mm