NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 512MB RAM + 8GB eMMC - with headres

Bestseller

Product Code:: 43302810

NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 512MB RAM + 8GB eMMC - with headres

175 GEL

Brand FriendlyARM
Shipping from Poland
Post delivery July 18
Shipping cost for orders to Georgia from GEL 118

Properties

UC - I2C: yes
UC - USB: microUSB
UC - ядро: 4. Quad Core
UC - UART: yes
UC - Разъем: 5V microUSB
UC - microSD: yes
UC - SPI Interface: yes
UC - Внешняя память: eMMC 8 GB

General characteristics

UC - RAM: 512 MB
UC - HDMI: yes
UC - ядро: Cortex A7
UC - Linux: yes
UC - Android: No
UC - Windows: No
UC - Ethernet: yes
UC - frequency: 1.2 GHz
Интерфейс UC - LCD: No
UC - microcontroller: Allwinner H3
Интерфейс UC - камеры: No
UC - Цифровые контакты: 68

Other features

Brand: FriendlyARM

Performance

Product Type: Запчасть для микрокомпьютера

Description

Product description: NanoPi NEO Core Allwinner H3 Quad-Core 1.2 Ghz + 512 MB RAM + 8GB eMMC - with connectors

A smallNanoPi Neo Coreminiature computer with a quad-coreAllwinner H3processor clocked at1.2 GHz. On board the board there is8 GB of eMMC memoryand512 MB of DDR3 RAM. There were 3 USB Host and Ethernet ports (located on the pins),microSD cardslot and a microUSB connector. NanoPi is equipped with 68 GPIO pins.It works with the systems:Slaughterhouse, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.

NanoPi NEO Core with connectors.

Power supply for NanoPi NEO Core minicomputer

The system uses themicroUSBconnector as the power source. The manufacturer recommends that the voltage given on the connector should be5.0 V, while the current capacity of the power supply used should be at least2.0 A. In our offer you will findpower supplies meeting these parameters.

Operating system

NanoPi works with Debian systems. The drive can be amicroSDcard, which can be purchased from our store.

Operating systems can be downloaded fromthe manufacturer's website.The manufacturer also provides asystem installation guide.

Communication

You have it:

GPIO x 68 pin- general purpose outputs/inputs, which can be used to operate LEDs, buttons,motorcontrollers. Among them there are pins supporting the interfaces: I2C, SPI and UART.
MicroSD slot- slot for a microSD memory card, on which the operating system can be installed.

Specification Model NanoPi Core Specification Processor Allwinner H3 Core Quad-Core ARM Cortex A7 Systems Slaughter, Ambian, DietPi, Lakka, Kali, OpenWrt, etc. Clocking 1.2 GHz Memory RAM 512 MB DDR3 32-bit Memory 8 GB eMMCmicroSD card GPIO socket 68 pin GPIO Power supply 5 V / 2 A - microUSB Dimensions of the tiles 40 x 40 mm Interfaces USB Host 3 x USB 2.0 on 2.54 mm pins Network interface Ethernet Gigabit on 2.54 mm pins Video - Audio I/O port (4-pin, included on pins 2.54 mm) Camera - LCD - Communication UART, SLEEPING, I2C, GPIO Debugger Serial port on 2.54 mm pins Other status LEDs Included 2x goldpin 24-pin / 2.54 mm 1x gpolypin 20-pin / 2.54 mm

Useful links