NanoPi NEO3-LTS - RK3328 Quad-Core 1,3 GHz + 2GB RAM
Bestseller
- Product Code:
- 47769515
Out of stock
Properties
- UC - RAM
- 2 GB
- UC - I2C
- yes
- UC - USB
- 1x USB
- UC - UART
- yes
- UC - Linux
- yes
- UC - Разъем
- USB typ C
- Интерфейс UC - LCD
- No
- Интерфейс UC - камеры
- No
- UC - Цифровые контакты
- 26
General characteristics
- UC - ядро
- 4. Quad Core, Cortex A53
- UC - HDMI
- No
- UC - Android
- No
- UC - frequency
- 1.3 GHz
- UC - SPI Interface
- yes
- UC - Внешняя память
- microSD card
- UC - microcontroller
- RK3328
Other features
- Brand
- FriendlyARM
Description
Product description: NanoPi NEO3-LTS - RK3328 Quad-Core 1.3 GHz + 2 GB RAM
NanoPi Neo 3 small computer based on the RockChip RK3328 processor with ARM Cortex-A53 core clocked at 1.29 GHz. It is equipped with 2 GB of DDR4 RAM, a Gigabit Ethernet port with a unique MAC address, a USB 3.0 slot, a USB Type-C power socket, a microSD card slot and 26 GPIOs. The module runs the Friendly Wrt / Ubuntu operating system.
NanoPi Neo3.
NanoPi Neo3 - pinouts.
What you need to run NanoPi Neo3?
- MicroSD memory card - the medium on which the operating system will be installed.
- AC adapter with microUSB plug - 5V with 1A current capacity with USB type C connector.
NanoPi works with systems prepared by the manufacturer: Friendly Wrt and Ubuntu. The disk of the device can be a microSD card.
The operating systems can be downloaded from the manufacturer's website. The manufacturer also provides a guide how to install the system.
Communication of NanoPi Neo3 minicomputer
The device has been equipped with standard communication interfaces that can be found in standard PC-class computers.
- 1x USB 3.0 type A + 2 USB 2.0 ports on 2.54 mm pins, where you can connect WiFi adapter, mouse or keyboard. The number of connectors can be increased by using the USB hub.
- 1x Ethernet 1 Gb/s socket for wired LAN connection.
- GPIO x 26 pins - general purpose inputs / outputs, which can be used to operate LEDs, buttons, motor drivers. These include such interfaces as I2C, I2S, SPI and UART.
- MicroSD card slot - a slot for a microSD card which is a carrier for the operating system.
Comparison of NanoPi Neo2 and NanoPi Neo3
Model
NanoPi Neo2
NanoPi Neo3
Processor
Allwinner H5
RockChip RK3328
Architecture
Cortex A53
Cortex A53
Clocking
400 MHz to 1.2 GHz
400 MHz to 1.296 GHz
Core voltage
1.1 V / 1.3 V, two-step voltage adjustment
0.96 V to 1.3 V, 6-level dynamic scaling and voltage adjustment
Number of cores
4
4
Memory bus
DDR3 16-bit
DDR4 32-bit
RAM Frequency
504 MHz
786 MHz to 1056 MHz, dynamic scaling
Ethernet
10/100/1000 Mb/s, software generated MAC address
10/100/1000 Mb/s, unique MAC address
USB
USB 2.0
USB 3.0
Fan connector
-
yes
Power connector
microUSB
USB type C
Key
-
User Key
Uboot
U-boot-2017.11
U-boot-2014.10
Kernel
4.14
5.4
OS
FriendlyWrt / Ubuntu core 16.4
FriendlyWrt / Ubuntu core 18.04
Dimensions
40 x 40 mm
48 x 48 mm
NanoPi Neo3 Minicomputer.
NanoPi Neo3 specification
- CPU: RockChip RK338 ARM Cortex A53 Quad-Core 1.3 GHz
- RAM: 2 GB DDR4
- MicroSD slot
- Ethernet: 10/100/1000 Mbps with unique MAC
- USB:
- 1x USB 3.0
- 2x USB Host on 2.54 mm pin
- USB Type C for power
- Pin Connector: 26-pin GPIO 2.54mm I2C, I2S, SPI, UART
- LED:
- PWR LED (red)
- STAT LED (green)
- Button: 1x
- Operating temperature: from -20°C to 70°C
- Power supply: 5 V / 1 A USB C
- PCB: 6 layers
- Dimensions: 48 x 48 mm
- Weight: 22 g
Useful links
- User guide
- Diagram
- Dimensions
- Documentation RK3328