GPS module UBX-G7020-KIT + case - DFrobot
Bestseller
- Product Code:
- 99446876
Out of stock
Properties
- Voltage To
- 3.3 V
- Voltage From
- 5.0 V
General characteristics
- GPS - Точность
- -161 dBm, 161 dBm
- GPS - Обновление
- 1 Hz - 10 Hz
Other features
- Brand
- DFRobot
Ports & interfaces
- Connection
- UART
Description
Description
GPS module UBX-G7020-KT communicates through a serial (RX, TX) interface, it has 56-channel receiver, it works with a voltage from 3.3 V to 5 V. The system has a built-in antenna with the sensitivity of -161 dBm. The update frequency is from 1 to 10 Hz. Measurement accuracy reaches even below 2 meters.
The product is compatible with Arduino
The manufacturer providesthe Arduino libraryalong withthe user manual.
Set includes: GPS module, cable and case.
Specification
- Update frequency: from 1 to 10 Hz
- Current consumption: 30 mA
- 56-channel receiver
- Communication: serial UART interface
- High sensitivity: -161 dBm
- Accuracy:
- Autonomous: 2.5 m
- SBAS: below 2 m
- Operating temperature: - 40 to 85 °C
- Cold start: 29 sec
- Warm start: 28 s
- Hot start: 1 sec.
- Module dimensions: 28 x 28 x 8.6 mm
- Case dimensions: 37 x 48 x 16 mm
The module connection
Pin Description PPS - white wire Pulse output. VCC - red wire Powered by 3.3 V to 5 V. TXD - blue wire UART communication transmitter. RXD - green wire UART communication receiver . GND - black wire The ground of the system. EN - yellow wire The Enbale pin is activated by the high status.
Useful links
- The website of the manufacturer of DFRobot TEL0094
- WikiDoc user manual
- Module specification
- The Arduino library
