Gravity - gesture and touch sensor - UART- DFRobot SEN0285
- Product Code:
- 111100053
Properties
- Voltage To
- 3.3 V
- Voltage From
- 6.0 V
- Выходное напряжение от
- 0 V
- Выходное напряжение до
- 3.3 V
Other features
- Brand
- DFRobot
Description
A sensor module that combines gesture and touch recognition functions. It allows the detection of gestures from a distance of 0 to 30cm,thisdistancecan be adjusted in the above mentioned range. The device connected to the minicomputer allows to detect touch from 5points and to recognize7 types of gestures. The 5-way touch panel can be used either directly from the module's board or through the use of cables, the place provided by the project.
Gesture and touch sensor with connection cable.
Arduino compatible product
For a sample code and detailed information, see theuserguide.
Sensor connectionExample of connection of the sensor with ArduinoUnoextended by DFRobot Gravity- IO Expansion Shield.
To connect with Arduino you will need additional DFRobot Gravity- IO Expansion Shield,the expansion board should be purchased separately.
Gesture and touch sensor specifications- Power supply: 3.3 to 6 V (5 V recommended)
- Output voltage: 0 to 3.3 V
- Current consumption during operation: approx. 56.3 mA
- Sleep mode current consumption: approx. 40 µA
- Communication: UART
- Gestures supported:
- left-hand traffic
- right
- forward
- backward movement
- upward movement
- downward movement
- stall and take a hand
- Dimensions: 36 x32 mm
- Manufacturer's website
- Product wikis
