Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Bestseller
- Product Code:
- 47398318
69 GEL
Properties
General characteristics
- Max. frequency range
- 125 kHz
- Мин. частотный диапазон
- 125 kHz
Other features
- Brand
- SeeedStudio
- Transducer Type
- RFID
Description
Description
Easy to use module RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7 cm. The kit includes a cable adapted to overlay SeeedstudioBase Shield v2.0.
The module is supplied with 4-pin cable for cap Base Shield v2.0.
Specification- Supply voltage: 4.75 V to 5.25 V
- Working frequency: 125 kHz
- Optional output format: UART or Wiegand (selection with jumper)
- UART: 9600 baud, 8 data bits, 1 stop bit, no check bit
- Wiegand: 26-bit Wiegand format, 1 parity bit, 24-bit of data and 1 bit of odd parity
- Maximum reading range: 7 cm
- Equipped with 4-pin Grove connector, pitch 2 mm
- Dimensions: 40 x 20 mm
The product is compatible with Arduino
The manufacturer provides auser guide, along with examples forthe Arduino.
Connection
The sensor communicates with a microcontroller via a UART or Wiegandinterface. It has the following leads:
Pin Description GND The mass of the system. VCC Power supply voltage: 4.75 V to 5.25 V. RX The pin of the receiver. TX The pin of the transmitter.
Grove is a series of modules and sensors that are compatible with caps Base Shield working withArduinoandSTM32 Nucleo.
Useful links
- The website of the manufacturer: Seeedstudio 113020002
- User manual
- The sample program on GitHub
