Inveo LanTick Pro PE-2-2 - IoT relay module

Inveo modules allow remote control of devices via Internet. It has 2 relay outputs of 250V and 2 opto-isolated binary inputs operating in counter mode. The module is controlled through the built-in WEB server. It is adapted for mounting on a DIN rail.

Controlling and setting up the device can be accomplished in several ways:

• via the integrated WEB server with visualization
• using commands line
• using the MODBUS TCP Protocol
• using the SNMP Protocol
• using Android device

You can combine several modules in the M2M mode - with no need of useing a computer.

• Supply voltage: 12 to 24V DC
• Power: 1.5V
• Number of inputs: 2
  • Type of inputs: optocoupler or NO inputs
  • Input voltage: from 10V to 24 V
  • Frequency inputs: up to 1kHz
  • Maximum counter value: 4 294 967 296
• Number of outputs: 2
  • Output type: relay
  • Maximum voltage output: 250V AC / 30V DC
  • Maximum load: 4A per channel
  • Relay contacts: NO, COM, NC
  • Operation mode:
    • monostable
    • bistable
    • single release
  • Switching time: 100 MS
• Interface: RJ45 (10Base-T)
• Supported protocols:
  • HTTP
  • TCP
  • SNMP
  • MODBUS TCP
• Operating temperature: 5°C to 50°C
• Mounting on DIN rail
• Dimensions: 90 x 65 x 52.5mm

• LanTick Pro PE-2-2
• Patch cord 30 cm

• The website of the manufacturer Inveo
• User manual