IoTPi - 4-channel relay module RS485 RP2040 + ESP8266 WiFi - SB Components SKU24162
- Product Code:
- 109928298
Properties
- UC - WiFi
- yes
- UC - microcontroller
- RP2040
Features
- Channel
- 4
General characteristics
- UC - microcontroller
- ESP-8266
Other features
- Brand
- sb components
Protocols
- Communication
- WiFi
Description
The IoTPi module is equipped with 4 relays with galvanic separation and is based on the Raspberry Pi 2040 microcontroller with the ESP8266 module. The additional ESP system allows for WiFi communication, so you can create a simple system that allows you to remotely turn on and off devices or lighting. The maximum load of the relays is 10 A for 230 V AC and 30 V DC . The EL357NC optocoupler enables safe regulation of high voltages or currents. IoTPi with four relays is equipped with an AC / DC converter, thanks to which it can be connected directly to the 230 V AC power supply. The module can also be controlled using the prepared PiRealy software. The set also includes a DIN rail housing.
IoTPi - 4-channel RS485 RP2040 + ESP8266 WiFi relay module - SB Components SKU24162.
Relay module from RO2040.
- Built-in RP2040 and ESP8266
- 4 relays with galvanic separation
- Isolated RS485 port
- Isolated power supply
- Built-in Hi-Link HLK5M05 AC/DC converter
- 4 status LEDs for each relay, 1 programmable status LED and power LED
- 5 GPIO RP2040
- Possibility to install Raspberry Pi Pico overlays
- RP2040 chip
- ESP8266 chip
- Insulator
- WiFi Reset button
- microUSB port
- Power port
- RS485
- Boot button
- Additional GPIO pins
- Reset button
- RS3485
- IO pin insulator
- 6 relays
Pinout of the IoTPi 4-channel board.
- RP2040 chip
- ESP8266 chip
- Insulator
- WiFi Reset button
- microUSB port
- Power port
- RS485
- Boot button
- Additional GPIO pins
- Reset button
- RS3485
- IO pin insulator
- AC/DC converter
- AC input
- 4 relays
- System: Raspberry Pi RP2040 + ESP8266
- Number of relays: 4
- Communication protocol: RS485
- Connector: microUSB
- Security: optical isolation
- Switching voltage: 230 V AC / 30 V DC
- Switching current: 10 A
- Built-in power supply: Hi-Link HLK5M05
- Housing mounting: DIN rail
- Module dimensions: 121 x 86 x 20 mm
- Housing dimensions: 126 x 99 x 40 mm
- IoTPi relay module
- DIN rail housing
- Mounting screws
- Manufacturer's website: SB Compotnents SKU24162
- GitHub repository
