Laboratory power supply UNI-T UTP3313TFL-II 0-30V 0-3A

TheUTP3313TFL-IIlaboratory power supply unitfrom UNIT-Thasa stepless voltage regulation from 0 V to 30 V and acurrentregulation from 0 A to 3 A. It has oneoutput of adjustable DC voltage. It is equipped with two seven-segment LED displays, which glow in red (voltage) and green (current). The device is universally applicable both in amateur and laboratory electronics.

One. On/Off button.

2. current stabilization mode indicator.

3) Voltage stabilization mode indicator.

4) Voltage display.

5. current display.

6 Voltage jumper adjustment.

7. smooth voltage adjustment.

8. current stroke adjustment.

9. liquid current adjustment.

Minus terminal: 0 V to 30 V (black).

11. earthing terminal: connected to the housing and earthing (green).

12. plus terminal: 0 to 30 volts (red).

UNIT-T UTP3313TFL-II laboratory power supply unit.

• Output voltage range: 0 V to 30 V
• Output current range: 0 A to 3 A
• Operating parameters:
  • Voltage: AC 110 V / 220 V ± 5% 50/60 Hz
  • Operating temperature: 0°C to 40°C, relative humidity: ≤ 85% RH
  • Storage conditions: -10°C to 80°C, humidity ≤ 80% RH
• Output power: 96 W
• Load adjustment:
  • Voltage: < 0.01% + 3 mV
  • Intensity: < 0.1% + 5 mA
• Linear adjustment:
  • Voltage: < 0.01% + 3 mV
  • Intensity: < 0.1% + 5 mA
• Resolution setting (25°C ± 5°C):
  • Voltage: 10 mV
  • The intensity: 1 mA
• Resolution setting (20 Hz - 20 MHz):
  • Voltage: < 0.5% + 20 mV
  • The intensity: < 0.5% + 5 mA
• The pulses and noises:
  • Tension: ≤ 1 mVrms
  • The intensity: ≤ 3 mArms
• The temperature coefficient:
  • Voltage: ≤ 300 ppm/°C
  • Voltage: ≤ 300 ppm/°C
• Response time: < 100 uS (50% load, minimum intensity 0.5 A)
• Display: 4-digit
• Power supply:
  • AC voltage 110/220 V ± 5%
  • Frequency: 50 Hz/60 Hz
• Dimensions: 105 x 165 x 249 mm
• Weight: 3 kg

• Laboratory power supply UTP3313TFL-II
• Power supply cable
• Crocodile wire - banana