MILKIT Tubeless Sealant 75ml
Bestseller
- Product Code:
- 124080955
40 GEL
Properties
Design
- Color
- Multicolor
Other features
- Brand
- milKit
Description
The Swiss manufacturer milKit puts the point very high when it comes to sealing:A mixture always homogeneous, extremely stable at temperature and that seals cracks and holes up to 6 mm, completely without aggressive ingredients.
Even after a long period of use, it does not appeal, but dries evenly.
For better sealing under high pressure, milKit uses microfibers - sealing milk is therefore specially predestined for use in road and gravel tubeless tires.
Features of milKit Road&Gravel tire sealant.
Synthetic latex:no ammonia, no toxic ingredients.
Works very well even with high tyre pressure:for road, gravel and mountain bikes.
Microfiber technology seals large rails and holes (hasta 6 mm).
It stays fluid longer than other comparable products and always homogeneous:ended the annoyances shaken.
Works even at extreme temperatures of -20 to +50°C.
Do not leave rubber residues (´´rubber balls´´) in the tire.
It adheres better to the tyre wall than fine latex sealing products.
CO2 Compatible.
Made in Europe.
Application of milk sealing with milKit valve system.
1.
Remove the heart of the valve.
2.
Inflate the tire to a pressure between 0.5 and 1.5 bar.
3.
Measure the required amount of sealant in the milKit syringe and fill it in the pressurized tire.
4.
Wrap the heart of the valve and inflate the tyre to maximum pressure until the tyre jumps over the wheel
Even after a long period of use, it does not appeal, but dries evenly.
For better sealing under high pressure, milKit uses microfibers - sealing milk is therefore specially predestined for use in road and gravel tubeless tires.
Features of milKit Road&Gravel tire sealant.
Synthetic latex:no ammonia, no toxic ingredients.
Works very well even with high tyre pressure:for road, gravel and mountain bikes.
Microfiber technology seals large rails and holes (hasta 6 mm).
It stays fluid longer than other comparable products and always homogeneous:ended the annoyances shaken.
Works even at extreme temperatures of -20 to +50°C.
Do not leave rubber residues (´´rubber balls´´) in the tire.
It adheres better to the tyre wall than fine latex sealing products.
CO2 Compatible.
Made in Europe.
Application of milk sealing with milKit valve system.
1.
Remove the heart of the valve.
2.
Inflate the tire to a pressure between 0.5 and 1.5 bar.
3.
Measure the required amount of sealant in the milKit syringe and fill it in the pressurized tire.
4.
Wrap the heart of the valve and inflate the tyre to maximum pressure until the tyre jumps over the wheel
