Inductive proximity sensor LJ18A3-5-Z / BY 5mm 6-36V

Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 5 mm. It is powered with the voltage from 6 V to 36 V. The object detection is signaled by the appearance of a high status at the output (black wire) and the switching on of the red LED.

• Supply voltage: 6 V to 36 V
• Current consumption: 10 mA
• Measuring range: 0 to 5 mm ± 10%
• Output signal: digital 300 mA
• Output status: by default, in a low status, after the detection of the object, it changes to high status.
• Output type: PNP - NO (open by default)
• The LED, indicating the detection of the object
• Detected object: metal
• Response time: below 2 ms
• Operating temperature: -30 °C to +65 °C
• Diameter: 18 mm
• Sensor's length: 56 mm

• Brown wire - supply voltage
• Blue wire - ground - GND
• Black and white wire - digital output - OUT
  • there is no object - low status
  • object detection - high status