Ring LED RGB 7 x WS2812 5050
- Product Code:
- 53916377
Properties
- led type
- WS2812B
- Led Lens
- Четкий
- LED Wavelength
- RGB
- LED - светодиоды
- 7
- Светодиодный - цветной
- RGB
- Светодиодно - цифровой
- yes
Basic information
- Rated power
- 1.0 W
Other features
- Brand
- OEM
Description
Ring composed of 7 individually addressable WS2812 RGB LEDs with integrated driver. You only need one pin of the microcontroller to operate the module. The diodes are placed in a circle with the outer diameter of 23 mm. Each of them consumes up to 18 mA, which in this case gives a total value of approximately 130 mA. The chain can be supplied with 5 V.
The communication protocol used allows the diodes to be connected in series. The next chain should be connected to the output connector, connecting respectively 5 V, GND and DOUT from DIN. The manufacturer notes that when using more than 500 diodes, there may not be enough RAM in the Arduino Uno chip.
ConnectionThe device has four pins:
- GND - module ground
- 5 V - supply voltage, 18 mA current per one diode
- Data IN - digital control signal from microcontroller
- Data OUT - output for connecting the next ring
Product compatible with Arduino
You can find Arduino library on GitHub for NeoPixel modules along with connection examples.
- Supply voltage: 5 V
- Current consumption: 18 mA for one diode
- LEDs used: RGB LED WS2812(documentation)
- Number of diodes: 7
- Circle outer diameter: 23 mm
- Arduino library on GitHub
- Example project in Adafruit system
- WS2812B diode documentation
