Set of heat sinks for Raspberry Pi with thermoconductive tape - 3pcs

Set includes three radiators suitable for systems that are located on the board of minicomputer Raspberry Pi. Have the adhesive layer of thermo-conductive tape. Radiators dimensions - 14 x 14 x 6 mm and 9 x 9 x 5 mm.

Heat sinks are compatible with the Raspberry Pi minicomputer in the following versions:

• Raspberry Pi  2B, 3B, 3B+  - two heat sinks are mounted. There is no need to install the third, smallest heat sink because the power path has been improved.
• Raspberry Pi 4B - you can mount one heat sink from this set to the main microcontroller.  Microcontroller is the element that generates the most heat.

Radiators are compatible with minicomputer Raspberry Pi 3 B, 2 B and B+. Because of the improvement of the powertrack, there is no need to install a third, the smallest of the radiators.

Raspberry Piwith installed radiators.

Attention!

During installation, you should pay attention not to make short circuit between the adjacent other electronic elements.