Properties
- Voltage To
- 4.5 V
- Voltage From
- 15.0 V
Features
- Channel
- 2
Other features
- Brand
- OEM
Power
- Current
- 1.2 A
Description
Product description: TB6612FNG - 2-channel motor controller
Two channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).
Controller's specification- Maximum supply voltage for motors: from 4.5 to 15 V
- Continuous current 1,2 A
- Instantaneous current: 3,2 A
- Low current mode (Standby)
- Possibility of changing the direction of rotation of the motor
- Quick stop of the motor
- Housing: SMD SSOP24
- Controller channels can be combined to obtain higher current capacity
We also offer a module with TB6612 driver. The chip has holes for goldpin connectors (2.54 mm pitch), which allow to plug it into contact board or connect it by wires.
Pinouts of TB6612FNG chip.
PIN
DESCRIPTION
VCC
4.5 to 15V motor supply - filtered with 22uF (C30) and 100nF (C22) capacitors
VDD
Logic part supply 2.7V to 5.5V - filtered with 10uF (C25) and 100nF (C24) capacitors
A_PWM
Channel A PWM input
B_PWM
PWM input of channel B
A_IN2
A_IN1
Input specifying the direction of rotation of channel AB_IN2
B_IN1
Input specifying the direction of rotation of channel BMA_OUT1
MA_OUT2
Motor outputs of channel AMB_OUT1
MB_OUT2
Channel B motor outputs MGND Separate ground potential path for the motor power supply (ground connected in one point) GND Separate ground potential path for the logic part (ground connected in one pointWiring diagram of a bridge with two DC motors.
Wiring diagram of a bridge with one DC motor. Combined channels. Increased current capacity.
PIN
DESCRIPTION
VCC
4,5 to 15V motor supply - filtered with 22uF (C30) and 100nF (C22) capacitors
VDD
Logic part supply 2,7V to 5,5V - filtered with 10uF (C25) and 100nF (C24) capacitors
PWM
Connected PWM inputs of channel A and B
IN2
IN1
Connected inputs determining direction of rotation of channel A and BM_OUT1
M_OUT2
Motor outputs of channel A and B connected MGND Separate ground potential path for the motor power supply (ground connected in one point) GND Separate ground potential path for the logic part (ground connected in one pointVideo describing the operation of the H-bridge - DC motor driver.
Useful links
- TB6612 controller documentation
- Eagle program library