OLED 1,3'' 128x64px module for Raspberry Pi 4/3+/3/2/Zero - Waveshare 13890

Description

Shield for Raspberry Pi and Jetson Nano with blue OLED display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, it communicates via the I2C or SPI bus. Additionally, on board is a joystick and three buttons.

The subject of the sale is a shield with display, minicomputerRaspberry Pican be purchased separately.

Key features

• Standard connection via the GPIO connector of the Raspberry Pi 4 / 3+ / 3 / 2 / Zero / Zero W and Jetson Nano
• Additional interfaces: 4-SPI, 3-SPI, I2C
• The board consists of: 1x joystick (5-position), 3x buttons

Pins

The shield has an additional SPI and I2C interfaces, the board consists of three buttons and a joystick.

Symbol Pin Raspberry Pi Description KEY 1 P21 1 button / GPIO. KEY 2 P20 2 button / GPIO. KEY 3 P16 3 button / GPIO. Joystick Up P6 Joystick up. Joystick Down P19 Joystick down. Joystick Left P5 Joystick left. Joystick Right P26 Joystick right. Joystick Press P13 Joystick button. SCLK P11 / SCLK The clock line of SPI. MOSI P10 / MOSI Data line of SPI. DC P24 Selection of data / commands (high for data, low for commands). CS P8 / CE0 Selection of Chip,activated by low state. RST P25 The reset system is activated by the low state. Specification

• Driver: SH1106 (documentation)
• Interface: 4-SPI, 3-SPI, I2C
• Display color: blue
• Resolution: 128 x 64 px
• Supply voltage: 3.3 V
• Dimensions: 65 x 30,2 mm

Useful links

• The website of the manufacturer: Waveshare
• The manufacturer's instruction - Wiki
• User manual
• Diagram of the module
• Libraries for display
•  SH1106 system documentation
• Documentation display