Pico Motor Driver HAT - 12V/0,6A for Raspberry Pi Pico - SB Components SKU21468
Bestseller
- Product Code:
- 48239035
57 GEL
Properties
- Voltage To
- 6.0 V
- Voltage From
- 12.0 V
Features
- Channel
- 2
Other features
- Brand
- sb components
Power
- Current
- 0.6 A
Description
Product description: Pico Motor Driver HAT - 12V/0,6A motor driver for Raspberry Pi Pico - SB Components SKU21468
Engine driver in the form of a HAT overlay for Raspberry Pi Pico. The module features the L293D chip to control two DC motors or one stepper motor with a voltage from 6 V to 12 V and a current consumption of 0.6 A. There are screw connectors on the board to provide a secure connection for the power wires and motors. Power can also be supplied via a two-pin goldpin connector. There is also a slide switch on the board to switch the power supply to the motors.
Motor driver in the form of an overlay for Raspberry Pi Pico, Pico can be purchased separately from our store.
Motor driver in form of HAT overlay for Raspberry Pi Pico.
The manufacturer has prepared a user guide along with a sample program for Raspberry Pi Pico.
- Built in GPIO socket for Raspberry Pi Pico
- Motors powered from 6V to 12V
- Based on H-Bridge L293D chip
- Provided with screw connectors for secure wire connection
- Built-in LDO circuit to power Raspberry Pi Pico module directly from connectors
- Autonomous vehicles
- Intelligent gates
- Fire fighting robots
- Line tracking robots
HAT motor controller overlay specifications for Raspberry Pi Pico
- Chip: L293D
- Control: 2 DC motors or 1 stepper motor
- Supply voltage for motors: 6 V to 12 V
- Power supply switch
- Compatible with: Raspberry Pi Pico
- Uses 6 GPIOs of the minicomputer: 21, 20, 19, 18, 17, 16
- Dimensions: 21 x 51 mm
Overlay - driver for two DC motors or one stepper motor.
Useful links
- Manufacturers website
- User guide
- GitHub repository
