PNI ML70 cb antenna 200W 26-30Mhz

High performance CB PNI ML70 antenna: - The performance of the product is closely related to the technical characteristics of the antenna in ideal conditions of installation and use: SWR <= 1.2, maximum applied power 200 W, impedance 50 Ohms, stainless steel, etc. Communication distance: - Communication distance is another decisive factor in the acquisition and use of a CB antenna. Thus, the communication distance of maximum 9 km is reached in ideal working conditions: calibrated antenna, open field without obstacles, the station with maximum legally allowed power of 4W and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance. Antenna length: - Antenna length is a very important factor that can influence the communication distance. Thus, the longer the antenna, the longer the range. The PNI ML70 antenna has a length of 70 cm (magnetic base included). Magnetic base: - The magnetic base PNI 145 / PL in the package is provided with a 4 m cable, enough to place the antenna on the dome, has a diameter of 145 mm and a strong magnet that gives the antenna stability even at high speeds. Full package: - This kit is ready for assembly with the package: antenna, magnetic base with cable and PL259 plug, enclosure for calibration. All you have to do is mount the antenna on a magnetic base, connect it to a CB radio station and calibrate it for maximum performance. Specifications: General: - Working frequency: 26 - 28 Mhz - Number of channels: - Maximum power applied: 200W - Minimum SWR in the center of the band: less than 1.2 - Length: 70 cm (magnetic base included) - Impedance: 50 Ohm - Material: Stainless steel - Connector tip: PL259 - Hole diameter (mm): 16 mm - Cable length: 4m - Weight: 800g - size: 100 x 18 x 5 cm - I earn: 4 dBi - Working distance: 8 km - Operating temperature: -26 ° C ~ + 60 ° C The package contains: - Radio station antenna: Yes - RG58 cable: 4 m - PL259 plug: Yes - Magnetic base: 145 mm