PROFILE DESIGN 35C+ Carbon 22.2 mm Bar Ends 400 mm

The new range of extensions have evolved from our well proven t-series. they have been designed to offer distinct fit options. we have also adopted a new naming system whereby the name gives the angle and material of the extension. thus the 35c is a 35° bend in aluminium. Performance: - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. they enhance performance by allowing the rider to relax into their optimal position. which is why we provide different fit options so each rider can chase their best performance. Fit Data: - All of the new extensions are 400mm long, to allow for all sizes of rider to find their best fit. The 35c is a straight 35° bend The 50c is a dual bend with a 50° grip angle. - The 45/25c has a first section at 45° and the grip at 25°. The rider can choose whether to hold high for a shrugged position or low for a more open, head up position. - The 50c and 4525c offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin: - Recent trends in aerobar fit have been towards higher hand positions, so we’ve increased the rise compared to the previous generation extensions. We have focussed on the most popular angles from our previous range and added the 45/25c as a multi position option. Tech Guide: - All the extensions have a 22.2mm diameter in the clamping area. they are designed for cables to be routed out the rear of the extension so do not have cable exit holes. Who is it for: - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips.