Redox Li-Pol cell 2400mAh 1S 3,7V
- Product Code:
- 50587555
Properties
- Cell
- 1
- Тип ячейки
- Li-Pol
- Клетка - футляр
- cell 1S
General characteristics
- capacity mАh
- 2400 mAh
Other features
- Brand
- Redox
- Nominal output voltage
- 3.7 V
Weight & dimensions
- Width
- 45 mm
- Height
- 10 mm
- Length
- 50 мм
- Weight
- 49 g
Description
Lithium polymer battery Redox with a capacity of 2400 mA h and voltage 3.7 V. Battery terminals are wires with servo plugs (JR). The battery is mostly used in modeling and robotics. Due to its characteristics and dimensions, the battery is designed to power the MT-44 (TX) transmitter.
Li-Pol Redox 2400 mAh 1S 3.7 V.
The Li-Pol Redox 2400mAh battery has a JR connector.
- Type of cell: lithium-polymer
- Number of cells: 1S
- Capacity: 2400 mAh
- Voltage: 3,7 V
- Maximum charging current: 2.4 A (1 C)
- Connector: servo plug (JR)
- Power wires: 20 AWG
- Wire length: 9 cm
- Dimensions: 50 x 45 x 10 mm
- Weight: 49 g
We also offer chargers matched to the batteries.
When using Li-Pol packs you should pay special attention to proper charging of cells. It is important to keep the cells balanced, i.e. to evenly charge (to the same voltage level) each of the cells in relation to the others. There are many chargers for Li-Pol packs. We recommend the simplest compact chargers or advanced microprocessor based chargers available in our range. Storage of the packs is also an important issue. If the cells will not be used for a long time it is worth putting them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
