Resistive touch screen IPS LCD 3.5" 480x320px GPIO for Raspberry Pi - Waveshare 12824

Bestseller

Product Code:: 53916512

Resistive touch screen IPS LCD 3.5" 480x320px GPIO for Raspberry Pi - Waveshare 12824

Out of stock

Brand waveshare

Properties

Display

Touchscreen: Yes
(image-) diagonal: 3.5'', 3.5''
Screen resolution: 480x320px

Other features

Brand: waveshare

Экран

Screen Display: LCD IPS

Description

Touch screen, resistive 3.5" display for Raspberry Pi with a resolution of 320 x 480 px. It works with any 40-pin version of theRaspberry Pi using the GPIO pins - as an extension for the minicomputer.

The device communicates through GPIO pins - as an extension for the minicomputer.

Raspberry Piis sold separately.

Connect to the Raspberry Pi

In order to start the screen, you need to plug athe screen into the GPIO pins on the Raspberry Pi.

Example of connecting the screen to the Raspberry Pi.

Software

The manufacturer has prepared the operating system with the installed drivers. The system should be unpacked using an program such as WinZip and uploaded to the memory card usingWin32 Disk Imager.

Screenshot of the programWin32 Disk Imager, when you select the system, just press the Write button and wait until the installation process is completed.

Detailed description of the connection to install drivers, without changes to the system the Raspberry Pi and the image of the finished system can be found onthe manufacturer's website.

GPIO

Pin GPIO Symbol Description 1, 17 3.3 V Power 3.3 V. 2, 4 5V Power Supply 5 V.

3, 5, 7, 8, 10, 11

12,13,15,16, 18, 24

NC Not connected. 6, 9, 14, 20, 25 GND Ground. 19

TP_SI

Input data SPI for the touch panel. 21 TP_SO Output data SPI for the touch panel. 22

TP_IRQ

An interrupt from the touch panel. 23

TP_SCK

Clock signal SPI for the touch panel. 26 TP_CS Chip select for touch panel. Specification