RF antenna cable CFD400 - RP-SMA F/M - 1m - for SenseCAP M1 and fiberglass antenna - Seeedstudio 321990875

RF CFD400 antenna cable intended for use with SenseCAP M1 network gateway and fiberglass antennas . The use of such a cable significantly improves data transmission , allows for better coverage and ensures low signal loss . The cable is approximately 100 cm (+/- 3 cm) long and has RP-SMA F / M connectors at its ends.

CFD400 RF antenna cable - RP-SMA F / M - for SenseCAP M1 and fiberglass antenna - Seeedstudio 321990875.

RF antenna cable CFD400 - RP-SMA F / M.

• It has low insertion loss, which is typically 0.45 dB at 900 MHz
• Low VSWR, typically 1.1 dB at 900 MHz
• Made of solid materials that allow the cable to be used outdoors

• Cable type: antenna
• Compatible devices: SenseCAP M1 and fiberglass antennas
• Manufacturer part number: RF CFD400-BLACK
• Frequency range: 0 Hz to 6000 MHz
• Impedance: 50 Ohm
• VSWR:
  • Typical: 1.1 dB @ 900 MHz
  • Maximum: ≤1.5 dB @ 6 GHz
• Signal Strength Loss:
  • Typical: 0.15 dB @ 900 MHz
  • Maximum: ≤1.5 dB @ 6 GHz
• Capacitance: 76 pF / m2
• Velocity of Propagation: 85%
• Cable Connectors:
  • 1: NF type - female
  • 2: RP-SMA type - male
• Insulation resistance:> 1000 MOhm
• Breakdown voltage: 2.5 kV
• Cable length: 100 cm +/- 3 cm
• Cable outer diameter: 10.3 mm
• Bending radius: minimum 25.4 mm
• Sheath material: PE
• Conductor material: copper
• Sheath material: tinned copper wire

• The website of the manufacturer: Seeedstudio 321990875