Properties
- UC - RAM
- 2 kB
- UC - A/C
- 10-bit
- UC - PWM
- 6
- UC - USB
- microUSB
- UC - I2C
- yes
- UC - ядро
- 8-bit AVR, 1. Single Core
- UC - UART
- yes
- Voltage To
- 7.0 V
- UC - EEPROM
- 1 kB
- Voltage From
- 12.0 V
- UC - Вспышка
- 32 kB
- UC - аналог в
- 6
- UC - frequency
- 16 MHz
- UC - SPI Interface
- yes
- UC - microcontroller
- ATmega328
- Выходное напряжение от
- 3.3 V
- Выходное напряжение до
- 5.0 V
- UC - Цифровые контакты
- 14
Features
- Nominal output voltage
- 5.0 V
Other features
- Brand
- SeeedStudio
Description
Description
A module made by Seeedstudio is equipped with the ATmega328 microcontroller. The distribution of pins is compatible with the Arduino Uno. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication interfaces. The board contains a FTDI chip and microUSB connector. The module allows you to work with voltages of 3.3 V or 5V selected with a switch. In addition, the board has three connectors for connection of sensors fromGroveseries.
Key features- The ATMega328 microcontroller with Arduino Uno bootloader at 16 MHz frequency
- 3 connectors for connection of sensors fromGroveseries
- The possibility to work with a voltage of 3.3 V or 5 V (selected by switch)
- The distribution of pins is compatible with the Arduino so the shields will work correctly
The manufacturer provides a detaileduser manual.
Seeeduino v4.3 3,3 V / 5 V.
Specification- The module is compatible with Arduino Uno
- Embedded microcontroller: ATmega328P 16 MHz
- It works with a voltage of 3.3 V or 5 V
- 3 connectors for 4-pin Grove
- MicroUSB connector for programming of the board
- DC power supply: 7 to 12 V
- 14 I/O connectors
- 6 PWM outputs
- 6 analog inputs
- ISP connector
- Flash memory: 32 KB
- RAM: 2 KB
- EEPROM: 1 KB
- Dimensions: 69 x 53 mm
Useful links
- The website of the Seeedstudio 102010026manufacturer
- User guide - Wiki
- The scheme of the Seeeduino v4.2board