Properties
- Voltage To
- 220 V AC
- Voltage From
- 240 V AC
- Паяльник - Вентилятор
- No
- Припой - Горячий воздух
- No
- Кондиционер паяного типа
- Цифровой
- Припой - показания реальной температуры
- No
Basic information
- Rated power
- 60 W
Features
- Temperature
- 200 - 480 °C
Other features
- Brand
- Zhaoxin
Power
- Rated voltage
- 230 V
Description
Soldering tip station Zhaoxin 936D with total power 60 W and continuously adjustable temperature from 200 °C to 480 °C. The device is distinguished by a very light flask (only 45 g) and a real temperature readout on the display.
Comparison of soldering stations of 936 series.
Temperature stabilization and real-time readoutWhen setting the temperature, the LED display shows the set temperature value. After a few seconds, the screen shows the current temperature of the mainsail and its rise. When the set value is reached, the station informs the user with a sound signal. The temperature stability is ensured by the built-in microcontroller, which controls the work of Zhaoxin station.
Why should you choose Zhaoxin station?Because it has the function of temperature stabilization by means of a microcontroller. This means that the device constantly controls the actual temperature of the mainsail and the built-in microprocessor controls the heater current. Thanks to this, the station is able to adjust the current appropriately to the environment, which ensures stable operation. The station also has a continuously adjustable temperature and a wide selection of blades.
Check our offer for additional tips!
Specifications- Supply voltage: 220 V to 240 V
- Power: 60 W
- Stepless temperature control from 200 °C to 480 °C
- Temperature stabilization using a built-in microcontroller
- Bvery lightweight flask - 45 g, powered by 24 V
- Digital display with blue backlight
- Display shows the actual temperature of the mainsheet
- LED indicating the operating status of the heater
- ESD safesystem
- Warranty: 24 months
- Dimensions: 120 x 93 x 70 mm
- Weight: 1.68 kg
- Zhaoxin 936D soldering station
- Soldering iron with tip
- Soldering iron stand
- Sponge for cleaning the tip
First start-up
- After receiving the equipment, do not start it up immediately.
- The equipment should remain about 12 hours at room temperature before starting.
- Any reports of defects caused by premature start-up of the equipment will be rejected.
Note
Heating elements (heaters) and arrowheads are not subject to warranty or guarantee and their replacement is chargeable.
We also offer accessories for soldering:- soldering binders - tin of different diameters
- fluxes and colophons
- braids to remove excess tin
- suction nozzles
- soldering tips
- tweezers, holders, magnifiers
- sponges and cleaners
- User manual